Granular Floc
In stockSelect size:*
Delivery Cost
Up to 100kg - £ 0.98 delivery 3 days
1-25kg - £ 4.99 next day delivery
26-100kg - £ 9.99 next day delivery
101kg above – delivery cost will be calculated at checkout
Granular Floc is a pool chemical flocculent that assists in clumping together small particles suspended in the water, facilitating their removal by the filter. This product is especially useful after treating a green pool to get rid of dead algae.
Its action causes undesired debris to sink to the pool floor, resulting in noticeably clear and sparkling water. Once the particles have settled, they should be removed by vacuuming to waste. It's important to note that this product is intended for use only in pools equipped with sand filtration systems.
Storage- Ensure lid is replaced and sealed after use. Store in a cool, dry place to ensure chemicals do not become damp in storage. Handle products in well-ventilated area.
Download the MSDS HERE
Download the product specification HERE
2KG Jerry can
Packaging - UN approved fluorinated jerry can
Jerry can dimensions - 106mm x225mm
Jerry can material - High density polyethylene
Application Instructions:
- Maintain pH levels within the ideal range of 7.2 & 7.6. If the level is not in this range, adjust.
- Maintain total alkalinity within the ideal range of 80 & 150 mg/l (ppm). If the level is not in this range, adjust.
- Maintain free chlorine levels within the ideal range of 1 & 3 mg/l (ppm). If the level is not in this range, adjust.
- Pre-dissolve 100g of product per 10 litres (2.2 gallons) of clean, warm water in a clean plastic bucket.
- Stir well to ensure the product Is fully dissolved. Disperse the solution evenly over the whole water surface with the filtration in recirculation (to filtration).
- Run filtration in recirculation mode for 30 minutes, then turn the pump off and leave the pool/spa undisturbed for 12-34 hours.
- The debris will settle to the bottom of the pool/spa, where it can then be vacuumed.